By:
On:

You can monitor batteries in parallel (or series) with the BM-100 as long as the 500A continuous current rating is not exceeded. The BM-100 will cope with sudden spikes in current well above 500A, for instance during engine starting. You can also mix and match Victron kit with our veKonvert. We offer the BM-100 bundle, just so our customers can order a popular combination, but there is nothing to stop you buying any Victron Smart Shunt with ve.Direct interface and plugging it in to one of our veKonverts. veKonvert will even work with Victron BMV units and MPPTs, it detects what it is connected toRead More →

By:
On:

veKonvert connects to the SmartShunt via the veDirect interface.  All calibration of the boat’s battery capacity etc is done via the Bluetooth interface integrated into the SmartShunt.  Download the Victron app and follow the set up instructions included with the SmartShunt.  There’s no calibration required on the veKonvert interfaceRead More →

By:
On:

veKonvert is compatible with the following Victron products… BMV -700 BMV -702 BMV -700H BMV-712 Smart BMV-710H Smart BMV-712 Smart Rev2 SmartShunt 500A/50mV SmartShunt 1000A/50mV SmartShunt 2000A/50mV All MPPT Charge Controllers NOTE – veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged in to the VE.Direct interfaces of any Victron “Consumers” such as Multiplus, Quattro, Cerbo, etc.Read More →